Ubuntu On Sony Vaio FW Series

Tips & Tricks related to Sony Vaio FW series laptops

Posts Tagged ‘pulseaudio

HDMI sound output switcher for PulseAudio

with 9 comments

Here is another script which you can link for example to AV Mode button, to switch sound output to HDMI and back. First I thought I can use Alsa, but it works only with one application, other application can not play sound while another one is playing. So then I did it with PulseAudio which works correctly. This switcher works for all native Gnome/gstreamer sound applications, and some applications e.g. SMplayer refuse to switch their sound regardles what default output set in PulseAudio. If you have playing sound and then switched to HDMI, it will still play through old way and you need to restart your sound e.g. push stop/play button to point sound through new way.

First of all you need to prepare PulseAudio configuration. For some point PA does not add HDMI output to devices itself. We should add it and rename internal sound card to something readable. Open /etc/pulse/defauld.pa in editor with root privileges (e.g. sudo nano /etc/pulse/default.pa in terminal) locate line “#load-module module-pipe-sink” there. Open terminal and run this command there: aplay -l | grep -o -e "card [0-9]:.*[0-9]:" | sed -e "s/card \([0-9]\): \(.*\) \[.*device \([0-9]\).*/load-module module-alsa-sink device=hw:\1,\3 sink_name=\2/"

Command returns two lines which we need to add to default.pa file after that line you located earlier. In my case this lines look like:


#load-module module-null-sink
#load-module module-pipe-sink
load-module module-alsa-sink device=hw:0,0 sink_name=Intel
load-module module-alsa-sink device=hw:1,3 sink_name=HDMI

### Automatically load driver modules depending on the hardware available

Then you should restart PulseAudio (sudo /etc/init.d/pulseaudio restart) to changes make effect. You can check that devices added correctly by running pacmd list-sinks in terminal, you should see “name: <HDMI>” and “name <Intel>” if you have got the same names as in my case, theese names must be the same as after “sink_name” in lines you added to default.pa.

Ok, now to switcher:


#!/bin/bash
#
# Sound output switcher using Gnome,gconf,PulseAudio,Alsa,libnotify
#
# by Anton Veretenenko <anton&#91;email sign&#93;veretenenko.ru>

notify_show=1
notify_delay=500
hdmi_card_num=1
internal_card_name=Intel
hdmi_card_name=HDMI

is_hdmi_on=`amixer -c $hdmi_card_num cget numid=4,iface=MIXER,name='IEC958 Playback Switch' | grep -i -c -P -e "values=on"`

if [ "$is_hdmi_on" == "1" ]
then
 amixer -c $hdmi_card_num cset numid=4,iface=MIXER,name='IEC958 Playback Switch' off > /dev/null
 gconftool --set "/system/gstreamer/0.10/default/musicaudiosink" --type=string "pulsesink device=\"$internal_card_name\""
 gconftool --set "/system/gstreamer/0.10/default/audiosink" --type=string "pulsesink device=\"$internal_card_name\""
 gconftool --set "/system/gstreamer/0.10/default/chataudiosink" --type=string "pulsesink device=\"$internal_card_name\""
 pacmd "set-default-sink "$internal_card_name""
 if [ $notify_show -eq 1 ]
 then
  notify-send -u normal -t $notify_delay -i gnome-sound-properties "HDMI Off" "Sound output switched to $internal_card_name"
 fi
else
 amixer -c $hdmi_card_num cset numid=4,iface=MIXER,name='IEC958 Playback Switch' on > /dev/null
 gconftool --set "/system/gstreamer/0.10/default/musicaudiosink" --type=string "pulsesink device=\"$hdmi_card_name\""
 gconftool --set "/system/gstreamer/0.10/default/audiosink" --type=string "pulsesink device=\"$hdmi_card_name\""
 gconftool --set "/system/gstreamer/0.10/default/chataudiosink" --type=string "pulsesink device=\"$hdmi_card_name\""
 pacmd "set-default-sink "$hdmi_card_name""
 if [ $notify_show -eq 1 ]
 then
  notify-send -u normal -t $notify_delay -i gnome-sound-properties "HDMI On" "Sound output switched to $hdmi_card_name"
 fi
fi

Here you need to change hdmi_card_num to number of your HDMI sound card (you can get it by aplay -l in terminal) and internal_card_name to name you found earlier and hdmi_card_name to hdmi card name which you saw after “sink_name” parameter.

This switcher will show a popup notification, like you see when changing brightness 🙂

P.S. How to link this script to AV Mode button (XF86Launch2) read in post about headphones switcher script.


Advertisements

Written by egaistek

July 8, 2009 at 13:22

Posted in Vaio

Tagged with , , , , , , ,